首页 范文大全 古典文学 职场知识 中国文学 公文书信 外国名著 寓言童话 百家讲坛 散文/诗歌 美文欣赏 礼仪知识 民俗风情
  • 工作总结
  • 工作计划
  • 心得体会
  • 竞聘演讲
  • 会议发言
  • 爱国演讲
  • 就职演说
  • 开业开幕
  • 思想学习
  • 征文演讲
  • 经验材料
  • 述职报告
  • 调研报告
  • 工作汇报
  • 年终总结
  • 申报材料
  • 学习体会
  • 企划方案
  • 活动方案
  • 技巧经验
  • 模板范例
  • 思想宣传
  • 经济工作
  • 工作报告
  • 组织人事
  • 反腐倡廉
  • 慰问贺电
  • 先进事迹
  • 思想汇报
  • 入党申请书
  • 党会发言
  • 先进性教育
  • 入团申请书
  • 个人简历
  • 演讲稿
  • 调查报告
  • 实习报告
  • 和谐社会
  • 观后感
  • 读后感
  • 作文范文
  • 自我鉴定
  • 讲话稿
  • 自查报告
  • IP通信实验报告——OSPF,认证实验

    时间:2020-11-26 12:32:59 来源:蒲公英阅读网 本文已影响 蒲公英阅读网手机站

    相关热词搜索:实验 认证 通信

     IP 通信基础实验报告 实验一

     OSPF 认证实验

     一、

     实验目的

     1、 掌握在 GAR 路由器上配置 OSPF 所需的基本命令; 2、 理解和巩固 OSPF 的基本原理; 二、

     实验内容(仿真程序‘ ospf area authentication without MD5.pkt ’和‘ ospf with MD5.pkt ’)

     1、 OSPF 明文加密 2、 OSPF MD5 加密 三、

     实验设备

     路由器

      2 台 PC 机

      2 台 交叉网线

      3 条 四、

     实验拓扑图

     五、

     配置步骤

     1 1 、5 MD5 加密

     RT1 ==== ==============================

     Router>en

     Router#conf t

     Enter configuration commands, one per line.

     End with CNTL/Z.

     Router(config)#ho RT1

     RT1(config)#int loopback1

     %LINK- -5 5- - CHANGED: Interface Loopback1, changed state to up

     %LINEPROTO- -5 5- - UPDOWN: Line proto col on Interface Loopback1, changed state to up

     RT1(config- - if)#no shutdown

     RT1(config- - if)#ip add 1.1.1.1 255.255.255.255

     RT1(config- - if)#exit

     RT1(config)#interface fastEthernet 1/0

     RT1(config- - if)#no shutdown

     %LINK- -5 5- - CHANGED: Interface FastEthernet1/0, ch anged state to up

     RT1(config- - if)#ip add 192.168.10.254 255.255.255.0

     RT1(config- - if)#ex

     RT1(config)#

     RT1(config)#interface fastEthernet 0/0

     RT1(config- - if)#no shutdown

     %LINK- -5 5- - CHANGED: Interface FastEthernet0/0, changed state to up

     RT1(config- - if)#ip add 1 0.1.1.1 255.255.255.0

     RT1(config- - if)#ex

     RT1(config)#router ospf 110

     RT1(config)#router- - id 1.1.1.1

     RT1(config- - router)#network 1.1.1.1 0.0.0.0 area 0

     RT1(config- - router)#network 10.1.1.0 0.0.0.255 area 0

     RT1(config- - router)#network 192.168.10.0 0.0.0.255 area 0 0

     RT1(config- - router)#area 0 authentication message- - digest

      // 不同之处

     RT1(config- - router)#exit

     RT1(config)#interface fastEthernet 0/0

     RT1(config- - if)#ip ospf authentication

     RT1(config- - if)#ip ospf message- - digest- - key 100 md5 ZTE110

      RT1(config- - if)#exit

     2 2 、明文加密

     R R T1

     Router>enable

     Router#conf t

     Enter configuration commands, one per line.

     End with CNTL/Z.

     Router(config)#hostname RT1

     RT1(config)#interface loopback1

     RT1(config- - if)#no shutdown

     RT1(config- - if)#ip address 1.1.1.1 255.255.255.255

     RT1(config- - if)#exit

     RT1(c onfig)#interface fastEthernet 1/0

     RT1(config- - if)#no shutdown

     RT1(config- - if)#ip add 192.168.10.254 255.255.255.0

     RT1(config- - if)#exit

     RT1(config)#router ospf 110

     RT2(config- - router)#router- - id 1.1.1.1

     RT1(config- - router)#network 10.1.1.0 0.0.0.255 area 0

     RT1(co nfig- - router)#network 1.1.1.1 0.0.0.0 area 0

     RT1(config- - router)#network 192.168.10.0 0.0.0.255 area 0

     RT1(config- - router)#area 0 authentication

     RT1(config- - router)#exit

     RT1(config)#interface fastEthernet 0/0

     RT1(config- - if)#no shutdown

     RT1(config- - if)#ip addres s 10.1.1.1 255.255.255.0

     RT1(config- - if)#ip ospf authentication

     RT1(config- - if)#ip ospf authentication- - key zxr10

     RT1(config- - if)#exit

     =========================================================

     RT2

     Router>enable

     Router#conf t

     Enter configuration commands, on e per line.

     End with CNTL/Z.

     Router(config)#hostname RT2

     RT2(config)#interface loopback1

     RT2(config- - if)#no shutdown

     RT2(config- - if)#ip address 2.2.2.2 255.255.255.255

     RT2(config- - if)#exit

     RT1(config)#interface fastEthernet 1/0

     RT1(config- - if)#no shutdown

     RT1 (config- - if)#ip address 192.168.20.254 255.255.255.0

     RT1(config- - if)#exit

     RT1(config)#

     RT2(config)#router ospf 110

     RT2(config- - router)#router- - id 2.2.2.2

     RT2(config- - router)#network 2.2.2.2 0.0.0.0 area 0

     RT2(config- - router)#network 10.1.1.0 0.0.0.255 area 0

     RT2 (config- - router)#network 192.168.20.0 0.0.0.255 area 0

     RT2(config- - router)#area 0 authentication

     RT2(config- - router)#redistribute connected

      \ \\ \ 这一句可有可无

     RT2(config- - router)#exit

     RT2(config)#interface fastEthernet 0/0

     RT2(config- - if)#no shutdown

     RT2(config- - if)#ip

     address 10.1.1.2 255.255.255.0

     RT2(config- - if)#ip ospf authentication

     RT2(config- - if)#ip ospf authentication- - key zxr10

     RT2(config- - if)#exit

     六、

     验证方法及验证结果

     1. 明文认证

     Router(config)#do show ip ospf neig

     验证结果如下:

     2.5 MD5 认证

     Router(config)#do show ip ospf neig

     验证结果如下:

     七、

     实验结论

     GAR 支持 OSPF 明文和 MD5 加密认证

    • 范文大全
    • 职场知识
    • 精美散文
    • 名著
    • 讲坛
    • 诗歌
    • 礼仪知识